Sometimes we will find that the rotary kiln needs to run at low slope and high speed in the process of operation, so some people worry that it will have some bad loss effect on the kiln equipment. But there are reasons for this, such as:

1. It is beneficial to increase the material temperature and calcination temperature. In the rotary kiln, the materials are in the accumulation state, and the outer materials are directly heated. The materials close to the flame side are subject to flame radiation and convective heat transfer. The one side contacting with the kiln lining obtains heat through the conduction and heat transfer of refractory bricks, while the materials in the accumulation state can only obtain heat by conducting heat from the outer layer of materials, while the materials in the accumulation state can only rely on the outside A layer of material conducts heat and obtains heat. The increase of rotary kiln speed can increase the material turnover times, heat gain and material temperature, that is, the calcination temperature;

2. With the increase of kiln speed, the material is turned over many times and heated evenly, so the hot clinker is even. Due to the increase of kiln speed and the number of material turnover, the temperature difference between exposed flame radiation and material landfill is reduced, which is beneficial to prolong the life of refractory brick. According to reports, the temperature difference of kiln lining surface can reach 400 ℃ with each rotation of wet water kiln, while that of precalciner kiln can reach 200 ℃. It is well known that the speed of the former is generally 1 R / min. The latter were at 3 R / min.

Therefore, the above is the reason for the low slope and high-speed operation of the rotary kiln. Through the content explanation, it can be seen that this can well improve the reaction temperature and calcination temperature of the materials, so as to make the materials heated evenly, so as to improve the production efficiency and quality of the kiln, so that we can improve the production efficiency through many small skills when using the kiln.