Online
message
Wet ball mill is the key equipment for crushing materials after being crushed. It is composed of feeding part, discharging part, rotating part and transmission part. Ball mills are widely used in cement, silicate products, new building materials, refractories, chemical fertilizers, black and non-ferrous metal beneficiation and glass and ceramics industries. They are used for dry or wet grinding of various ores and other grindable materials.
According to the different production and quality of wet ball mill in Henan, Hongke wet ball mill manufacturer is welcome to provide different service.
Working principle of wet ball mill
The working principle of the wet ball mill is that the motor drives the cylinder to rotate through the deceleration device. The crushed ore and steel ball in the cylinder are driven by the friction force and centrifugal force during the cylinder rotation, and are carried to a certain height by the liner plate. Due to the gravity, the ore is gradually crushed under the impact and grinding. The crushed ore is discharged out of the cylinder through discharging part. After the discharged minerals are graded into qualified products in the spiral classifier, the coarse sand is returned to the ball mill through the combined feeder to continue grinding. The feeding machine continuously and evenly feeds the ore into the ball mill continuously and evenly through the combined feeder, and the milled materials are continuously discharged from the ball mill. Ball mill is a grinding equipment which can work continuously 24 hours a day.
Performance characteristics of wet ball mill
Optimal configuration of high manganese liner
Use special lubricating oil for bearing bush matching with wet ball mill
Wide range of processing materials, higher production capacity than dry grinding, low unit power consumption
The multi-stage grinding process can be adopted, which is forced discharge, and the flow rate is fast
The temperature of hollow shaft can be reduced in material operation to protect mill liner
Technical parameters of wet ball mill
| Model | Cylinder speed （r/min） | Ball loading （t） | Feeding （mm） | Discharging （mm） | yieldyield （t/h） | Motor power (kw) | Total weight (t) |
| Ф900×1800 | 36-38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 5.5 |
| Ф900×3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 6.7 |
| Ф1200×2400 | 36 | 3 | ≤25 | 0.075-0.4 | 1.5-4.8 | 30 | 12 |
| Ф1200×3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 | 12.8 |
| Ф1200×4500 | 32.4 | 5 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 | 13.8 |
| Ф1500×3000 | 29.7 | 7.5 | ≤25 | 0.074-0.4 | 2-5 | 75 | 16.8 |
| Ф1500×4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 110 | 21 |
| Ф1500×5700 | 28 | 12 | ≤25 | 0.074-0.4 | 3.5-6 | 130 | 25.8 |
| Ф1800×3000 | 25.4 | 11 | ≤25 | 0.074-0.4 | 4-10 | 130 | 29 |
| Ф1830×4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 4.5-12 | 155 | 35.5 |
| Ф1830×6400 | 24.1 | 21 | ≤25 | 0.074-0.4 | 6.5-15 | 210 | 43 |
| Ф1830×7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.5-17 | 245 | 43.8 |
| Ф2100×3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 6.5-36 | 155 | 34.8 |
| Ф2100×4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 8-43 | 245 | 38 |
| Ф2100×7000 | 23.7 | 26 | ≤25 | 0.074-0.4 | 8-48 | 280 | 56.6 |
| Ф2200×4500 | 21.5 | 35 | ≤25 | 0.074-0.4 | 9-45 | 280 | 51.8 |
| Ф2200×6500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 14-26 | 380 | 60 |
| Ф2200×7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 | 62 |
| Ф2200×7500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-30 | 380 | 64.8 |
