29 2020-12

How to Maintain Cement Rotary Kiln? Pay Attention to These Four Aspects!

The operation of rotary kiln is characterized by heavy load, high temperature and continuous operation. Therefore, due to the rotary kiln has a certain slope and a long span between the front and the rear, the self weight, the long-term wea···

15 2020-12

How to Make the Service Life of Jaw Crusher Longer?

Jaw crusher is a kind of medium size crushing for various ores and bulk materials, which is often widely used in mining, smelting, building materials, highway, railway, water conservancy and chemical industry. Hongke is a professional jaw c···

02 2020-12

How to Solve the Lock of Hammer Crusher Bearing?

Hammer crusher is a kind of equipment for crushing materials in the form of impact, which is divided into single rotor and double rotor. It is a crusher used to directly crush materials with larger particle size of 600-1800 mm to 25 mm or l···

23 2020-11

Price of 300-500tpd Environmental Protection and Energy Saving Lime Kiln

In recent years, with the increasing pressure of the national environmental protection policy, the production technology and product quality of old kilns have gradually been unable to meet the needs of modern production. Energy saving and e···

06 2020-11

Factors Influencing Grinding Fineness of Ball Mill

How to control grinding fineness effectively is an important factor to reduce cost and improve economic benefit. First of all, we should fully understand the influencing factors of grinding fineness.1. Ore hardness2. Crushing particle size ···

02 2020-11

Eight Technical Features of Energy Saving and Environmental Protection Type Activated Lime Rotary Kiln

(1) A vertical preheater is installed at the kiln tail, so that the waste heat of flue gas at the kiln tail is directly transferred to limestone, and the flue gas temperature can be reduced to below 280 ℃, which can effectively recover the···

17 2020-10

What are the requirements for the manufacturing process of rotary kiln body?

1. Open hearth furnace steel plate shall be used for kiln body, and the material shall meet the requirements, and the section shall be free from defects, which shall be confirmed as qualified after test.2. Make typesetting according to stee···

13 2020-10

What Are the Advantages of Zinc Oxide Rotary Kiln?

After the raw materials are put into the cylinder at high temperature for rotary calcination at high temperature, the uneven heating of the calcined materials can be avoided. And it will not form a circle inside the rotary kiln. So we can b···

06 2020-10

Waste Heat Utilization of Cement Rotary Kiln Can Reduce Pollution

Cement rotary kiln needs a lot of heat in normal production, usually we use coal powder, natural gas and other fuels as the heat source of rotary kiln. Because the temperature required for calcining cement is relatively high, usually 1200-1···

26 2020-09

How to Solve the Common Faults of Dryer?

Dryer can be divided into industrial production and civil type, industrial production dryer is also called drying equipment or dryer equipment, civil dryer is a kind of laundry equipment, generally after water cleaning and drying, it is use···

GET IN TOUCH