14 2020-09

Sand Dryer is Also Known As Three-layer Drum Dryer, Three Return Drum Dryer

Sand dryer, also known as three-layer drum dryer and three-way drum dryer, is developed on the basis of single drum dryer. It is a better choice for drying materials with good fluidity in industry. According to the final moisture requiremen···

04 2020-09

What Are the Causes of Material Blockage in Double Drum Dryer?

The blockage of double drum dryer is mainly due to some mechanical impurities in the system. When conveying large particles in the material, the viscosity of crystalline material or material liquid exceeds the conveying limit. If the dryer ···

28 2020-08

What is the Drying Principle of Drum Dryer?

Drum dryer is a kind of dryer which is widely used. It has the advantages of high productivity, convenient operation, reliable operation and low power consumption. It is suitable for processing fine but not too cohesive materials. It can mi···

18 2020-08

How Can Rotary Dryer Equipment Be More Durable?

1. Start up normal, in a production line, there must be all kinds of drying equipment, but the characteristics of each machine are different, so we love to operate the dryer when the operating procedures can not be a bit lax, so we in the o···

03 2020-08

The Benefits of Increasing the Speed of the Dryer's Hot Air Flow

Causes of various problems in the slime dryer When the material is dried in the dryer cylinder, its heat transfer efficiency will directly determine the degree of material drying effect. Based on years of experience, Linqu Sun has summed up···

01 2020-08

Causes of Overheating of Coal Slime Dryer Materials

1. The air velocity in the drying room is too low, and the outside fog drops are dried first when the fog group is drying. Because the initial velocity of the fog group is much higher than the gas velocity, the dry powder enters the high te···

30 2020-07

Causes of Various Problems in Slime Dryer

Causes of various problems in slime dryer1. Short life of internal wearing parts.Reason: Poor selection of internal materials and cutting corners will lead to easier parts damage and shorter service life.2. The degree of dryness and wetness···

16 2020-07

Safe Use and Maintenance of Dryer

The dryer is a drying machine that can dry a variety of materials and is simple and reliable in operation. Because of its reliable operation, strong adaptability, and large processing capacity, the dryer is widely used in metallurgy, buildi···

10 2020-07

How to Deal with the Unexpected Power Failure of Dryer

Unexpected power failure of dryer? Emergency measures are essential. When using, many manufacturers will encounter unexpected power failure. If this happens, it will affect the production and operation. In order to avoid this situation, it ···

09 2020-07

Four Drive Installation Requirements of Dryer

Dryer is a kind of processing equipment for processing high humidity materials. Due to its reliable operation, large operation flexibility, strong adaptability and large processing capacity, it is welcomed by river sand and yellow sand proc···

GET IN TOUCH